Bubble Machines for Parties or Events

OPERATING DETERMINATIONS

Since bubble machines are not splash proofed, use them in closed rooms only. If water runs into the husings interior, unplug mains lead immediately and consult your dealer.

Fill up the tank with bubble fluid before the start up and always in switched off position.

Only adults are allowed to operate this device. Do not leave the device switched on without supervision. Devices that are not in use must be put out of operation by switching them off or unplugging the mains lead.

Avoid brute force when installing or operating this device. Do not shake the device.

INSTALLATION

Before your first start up, please make sure that there are no evident damages caused by transportation. In case of any cable or housing damages, please do not plug the mains lead in before having consulted the supplier.

During the installation please make sure that there are no decoration articles covering the venting slots. Around the device there should be a free space of at least 25cm to guarantee appropriate air circulation.

This device can be mounted both on the ground and the ceiling. Please make sure you will not exceed an inclination of 10 degrees. Furthermore do not orientate  the escape nozzle directly in the direction of the audiences eyes. In order to create a good effect, there should be a distance between the device and the audience of 1.5m.

OPERATION

To operate, switch on the power-supply switch at the rear panel.

MAINTENANCE

Before opening the housing disconnect at mains.
Keep away from moisture.

Posted in Party Hire & Event Hire
See More Information Here



Pages